Victron Energy MultiPlus-II 12/3000/120-50 2x120V (UL certified) Inverter/Charger | PMP122305102
The MultiPlus-II 2x 120V has all of the expected features of the Victron Energy versatile inverter/charger range, including PowerControl, PowerAssist, Input Current Limit, two AC outputs, as well as parallel and 3ph configuration for larger capacity VE.Bus systems. Suitable for LiFePO4 batteries and a variety of other battery technologies.
100% original guarantee
Return within 30 days
Free delivery on most orders
Victron Energy MultiPlus-II 12/3000/120-50 2x120V (UL certified) Inverter/Charger | PMP122305102 at a glance
- DC Input Voltage12V
AC Output Voltage120V
Continuous Power2400W at 25°C
Peak Power (3 sec.)5500W
DC Charge Current120A
Number of AC Input1 X 120V- Transfert Switch50A
- Number of AC Output2 X 120V
Dimensions (H x W x D)23 X 11 X 6 in
578 X 275 X 148 mm
Weight48 lbs / 22 kg
Victron Energy MultiPlus-II 12/3000/120-50 2x120V (UL certified) Inverter/Charger | PMP122305102
Standard marine, mobile or off-grid application
Loads that should shut down when AC input power is not available can be connected to a second output (not shown). These loads will be taken into account by the PowerControl and PowerAssist function in order to limit AC input current to a safe value when AC power is available.
Grid parallel topology with MPPT solar charge controller
The MultiPlus-II will use data from the external AC current sensor (must be ordered separately) or power meter to optimise selfconsumption and, if required, to prevent grid feed. In case of a power outage, the MultiPlus-II will continue to supply the critical loads
The MultiPlus-II 2 x120V is the perfect one-box mobile solution for standard North American 50A 120/240VAC split-phase applications. Whether it is supplied from shore power or a generator, the MultiPlus-II 2x120V can accept and passthrough both lines of a 120/240V supply, with the capability to utilize the full 50A for charging and AC loads. When connecting to a single phase 120V supply, the L1 input of the MultiPlus-II 2x120V will accept incoming power for charging and passthrough, while combining the L1 and L2 outputs for single-phase 120V on each line.
The MultiPlus switches to inverter operation when no AC source is available. The inverter output is also 120V single phase. In inverter mode, the MultiPlus-II 2x120V internally connects both lines L1 and L2 together to provide 120VAC to loads on either output. Therefore, in all connection circumstances, both sides of a distribution panel will be supplied with 120V. However, 240VAC is only available when the MultiPlus is supplied by a split phase 120/240VAC source. This prevents heavy loads such as water heaters or 240V air conditioners from discharging the battery.
The MultiPlus-II 2x 120V has all of the expected features of our versatile inverter/charger range, including PowerControl, PowerAssist, Input Current Limit, two AC outputs, as well as parallel and 3ph configuration for larger capacity VE.Bus systems. Suitable for LiFePO4 batteries and a variety of other battery technologies.
120/240 V input and output, or 120 V input and output (always 120 V output when in inverter mode)