The KUS S5U-15 Liquid Level Sender monitors the level of water, gasoline, diesel, or hydraulic oil in compatible tanks. Its magnetic float and reed-switch sensing system provide reliable level readings without a traditional mechanical wiper arm. With a 15 in probe and 1.5 in NPT threaded mount, it connects to tanks equipped with a compatible sender port.
FEATURES
15 in probe: Designed for compatible water and fuel tanks
American Standard output: 240 Ω empty to 33 Ω full
Magnetic float and reed-switch sensing system with no mechanical wiper arm
316 stainless steel sender body and corrosion-resistant NBR float
IP65-rated sealed housing
Compatible with 12V and 24V systems
Suitable for water, gasoline, diesel, and hydraulic oil
SPECIFICATIONS
Probe length: 15 in
Mounting: 1.5 in NPT male thread with hex head
Output signal: 240–33 Ω (240 Ω empty, 33 Ω full)
Sensing method: Magnetic float with reed-switch chain
Resolution: 21 mm
Body material: SUS 316 stainless steel
Float material: NBR
Wire leads: PVC-jacketed, pink (ground) and black (signal)
Protection rating: IP65
Operating temperature: -40°F to +185°F (-40°C to +85°C)
Operating voltage: 12V or 24V DC systems
Power consumption: 125 mW
Manufacturer part number: KUS 154015
WHAT'S INCLUDED
1 × KUS S5U-15 liquid level sender
INSTALLATION & COMPATIBILITY
Fits tanks equipped with a 1.5 in NPT sender port.
Connect the pink wire to ground and the black wire to the gauge sender terminal. No separate power feed is required.
Use a thread sealant compatible with the liquid stored in the tank.
Allow at least 1 in clearance between the tank bottom and float collar for plastic tanks, or 1/2 in for stainless steel and aluminum tanks.
Compatible with gauges using the American Standard 240–33 Ω resistance curve. Verify gauge compatibility before ordering.
Recommended for select GoCode/NW Conversions wheel-well water tanks, including compatible 20-, 22-, 24-, 25- and 36-gallon models.