Lynx Smart BMS 500

Lynx Smart BMS Datasheet    Lynx Smart BMS User Manual

The Victron Lynx Smart BMS 500A is a battery management system designed exclusively for Victron Lithium Battery Smart batteries. It provides battery monitoring, system protection and communication with compatible Victron equipment, while integrating into the modular Lynx distribution system.

FEATURES

• 500A continuous contactor with a peak rating of 600A for 5 minutes

• Integrated pre-charge circuit to limit inrush current when connecting inverters and other capacitive loads

• Bluetooth monitoring and configuration through the VictronConnect app

• Built-in battery monitor displaying state of charge, voltage, current and historical data

• ATC/ATD control outputs for compatible chargers and loads

• Programmable relay and 1.1A auxiliary power output

• VE.Can communication with GX devices and NMEA 2000-compatible systems

• Monitors fuse status on up to 4 connected Lynx Distributors

• Supports parallel redundancy with up to 5 Lynx Smart BMS units

SPECIFICATIONS

• Model: 500A with M8 busbar connections

• Compatible system voltages: 12V, 24V and 48V

• Supply voltage: 9–58V DC

• Maximum peak current: 600A for 5 minutes

• Protection rating: IP22

• Operating temperature: -40°C to +60°C

• Dimensions: 190 × 180 × 80mm

• Weight: 1.9kg

• Warranty: 5-year limited warranty

IMPORTANT

• Designed exclusively for Victron Lithium Battery Smart batteries.

• A compatible GX device is required for closed-loop DVCC control of compatible Victron chargers and inverter/chargers.

• This model uses M8 busbar connections. Confirm terminal compatibility before integrating it with other Lynx components.

• No reverse-polarity protection is provided.