SmartSolar MPPT 150/85-MC4 VE.Can Solar Charge Controller

Download Datasheet   View User Manual

The Victron SmartSolar MPPT 150/85 is a high-performance solar charge controller designed to maximize energy harvest from solar panels and efficiently charge 12V or 24V battery systems. It features built-in Bluetooth, VE.Direct and VE.Can communication, allowing monitoring, configuration and synchronized operation with other compatible controllers.

FEATURES

• Ultra-fast MPPT technology for optimized solar energy harvesting

• Built-in Bluetooth with VictronConnect

• VE.Direct and VE.Can communication ports

• Synchronized parallel operation with up to 25 VE.Can controllers

• Programmable charging algorithms and relay

• Remote on/off control

• Electronic protection against overheating, PV reverse polarity and output short circuits

• Three pairs of MC4 solar connectors

SPECIFICATIONS

• Battery voltage: 12V or 24V

• Maximum PV open-circuit voltage: 150V (145V operating/start-up limit)

• Maximum charge current: 85A

• Maximum PV short-circuit current: 70A

• Suggested PV power: 1,200W at 12V; 2,400W at 24V

• Peak efficiency: 98%

• Maximum current per MC4 connector: 30A

• Protection rating: IP43 (electronics); IP22 (connection area)

• Operating temperature: -30°C to +60°C (full rated output up to 40°C)

• Dimensions: 246 × 295 × 103mm

• Weight: 4.5kg

IMPORTANT

• This specific model (SCC115085511) is designed for 12V and 24V battery systems only.

• The 150V PV limit is an absolute maximum under the coldest conditions. The operating voltage must remain below 145V.

• The three pairs of MC4 connectors are internally connected to a single MPPT tracker; they are not three independent solar inputs.

• The optional plug-in LCD display is sold separately.