Victron Energy Smart BMS CL 12/100
100% original guarantee
Return within 30 days for most orders
Free delivery on most orders
Victron Smart BMS CL 12/100
Battery Management System for 12V Victron Smart LiFePO₄ Batteries
🇳🇱 Engineered by Victron Energy – Trusted Power Management for Vehicles and Boats
The Victron Smart BMS CL 12/100 is an all-in-one battery management system designed exclusively for Victron Lithium Smart 12.8V LiFePO₄ batteries in 12V systems. Ideal for vehicle and marine applications, it ensures safe and efficient charging, load management, and cell protection — all while integrating seamlessly with any 12V alternator system.
Whether you're powering a campervan, off-grid boat, or mobile workstation, this compact BMS monitors and safeguards each individual battery cell against low voltage, high voltage, or high temperature, ensuring long battery life and safe operation.
🔧 Key Features
-
Designed for 12V Alternator Systems
Optimized for vehicles and boats using a standard 12V alternator. Enables safe connection with any alternator and starter battery. -
Built-In Alternator Current Limiting
The Alternator/Starter Batt+ port electronically limits input current to ~90% of the connected fuse rating, protecting both alternator and battery from overload.
E.g., a 100A fuse limits charging current to approx. 90A. -
Battery Cell Protection
Continuously monitors voltage and temperature on each individual cell, automatically disconnecting DC loads or charge sources to prevent damage. -
Bluetooth Connectivity
Monitor and configure the BMS via the VictronConnect App, including Instant Readout for real-time system status and diagnostics at a glance. -
Remote On/Off Terminal
Remotely enable or disable charging through the alternator port while keeping the BMS active. -
Pre-Alarm Output
Activates warning signals (LED, buzzer, or relay) before a shutdown occurs — ideal for proactive fault detection. -
Load and Charge Disconnect Outputs
Automatically disconnects loads and charging devices to maintain safe operating conditions.
⚙️ Specifications
- Battery Compatibility: Victron Lithium Smart 12.8V LiFePO₄ (up to 20 batteries / 84 kWh total capacity)
- Voltage System: 12V only
- Alternator Input Current Limit: ~90% of fuse rating
- Remote On/Off: Supported
- Pre-Alarm: Supported
- Bluetooth: Built-in (VictronConnect compatible)
- Dimensions & Mounting: See Victron Manual for system wiring & integration options
📦 What’s in the Box
- Victron Smart BMS CL 12/100
- Terminal connectors
- Quick-start guide
Note: Some applications may require additional interface cables (refer to the official manual).
Ensure the safety and efficiency of your lithium battery system with the Victron Smart BMS CL 12/100 — the intelligent heart of any 12V Victron LiFePO₄ setup.